Halloween tree

This is a Halloween tree made from a coffee can. I used a large coffee can(the cardboard type) painted the entire can in 2 coats of Burnt Orange, and allowed to dry. I then painted the scene and sprayed with 2 coats of matte finish sealer. For the tree I used a real tree branch and spray painted it black. Once everything was dry I mixed up some plaster a paris and poured it in the can. I filled it about 1/2 way with the plaster a paris. I then stuck the branch in the can and carefully leaned it up against something sturdy and allowed it to dry overnight. Once dry I added some spanish moss to the inside of the can and there you have a cute Halloween tree to hang your ornaments. I have made these up to about 4-5 feet tall.
 

Jack-paper mache, Folk Art pumpkin

 

 

 

 

Meet Jack.........Jack is a paper mache pumpkin. His head, hat, and candy corns are all made from paper mache. Jack is a ooak Folk Art pumpkin design by Phyllis Spaw Designs. For anyone wanting to try paper mache I listed the basic instructions below. Feel free to email me with any questions, or comments.

For his hat I started with a medium weight cardboard and shaped it into a cone. I've had this roll of cardboard laying around that works perfect for this kind of stuff. I really have no idea where it came from or what it is used for. It is about the thickness of a cearl box. I then tore several strips of newspaper in a variety of widths and set them aside. I then used about a 50/50 mix of Elmer's white glue and water and dipped the newspaper strips into them, and wiped most of the mixture off, leaving it wet enought to apply to the hat until the hat was completely covered in the newspaper. I allowed to dry and did a second coat. I cut the brim from the same cardboard and covered it in the same manner. I glued it to the cone with hot glue. Once it was dry I used a homemade paper mache paste that I found on pinterest. You can find the receipe here http://ultimatepapermache.com/paper-mache-clay I then used a pasty knife, or you can use a regular table knife also. I like the rounded edge of the pastry knives. They just seem to spread better. I covered the entire hat in a light to med coat of the paste and allowed to dry. This takes about 2-3 days to dry completly. Once dry I added a second coat. Once the second coat was dry I sanded it to kind of a rough finish, leaving some of the bumps and small air pocket holes to show. I then painted it in 2 coats of black. I did the pumpkin head in the same manner, but I used a plastic grocery bag from the grocery store stuffed with newspaper. I kinda shaped it by stuffing more in certain areas. I then followed the Elmer's glue/newspaper instructions for paper mache as above. Once dry I painted his head in 2 coats of Burnt Orange. I then sprayed him with 2 coats of a matte finish sealer and allowd to dry. I then mixed a bit of black with Burnt Umber and thinned it down with water, to the consistncey of ink and brushed it on a section at a time and quickly wiped some of it off with an old rag. I always keep a wet rag handy also, in case it starts to dry. I then dry brushed a few light highlights of Cadmium Yellow adding a bit more in the cheek areas. I then added his eyes, mouth, and nose. His legs are made from cut off railings, used to make the railings on a stairway. They were painted in Black and Burnt Orange and then sealed. Once everything was dry I drilled holes for his legs with a spade bit. I patched up the hole a bit with some of the paper mache paste and allowed to dry. I had already drilled a hole in the top of his head so I pulled out some of the newspaper with a pliers and then poured plaster a paris into the hole, to help keep his legs in place and nice and sturdy. Once dry I added some burnt Umber to his shoes, using a dry brush to make them look a little dirty. I then put a zebra pattern ribbon in his shoe strings then set him in his shoes. I also poured some plaster a paris in his shoes. Allow to dry overnight. I did the candy corns in the same paper mache method as above. I used some floral foam to cut the shape from, using a craft knife. I painted them in white, Burnt Orange, and Cadmium Yellow. I added a piece of twisted wire to the tops of the candy corns. I tied an orange ribbon around his hat and then glued the candy corns to the hat and then glued the hat to the pumpkin. I then hot glued natural spanish moss around the hairline and stuffed some in his shoes. I then lightly sanded areas on his legs, and there ya have it, a cute decoration for a porch, mantel, or where ever you choose. Jack stands appx 44” tall from the tip of his hat to the bottom of his shoes.

Denim pockets

Gotta love those denim pockets.  You can do so many things with them.  Below is a free tutorial on how to paint a couple of Halloween designs onto them.  A quick, easy, cute project.

Supplies
Denim pockets of your choice
Scissors-to cut out denim pockets.
Acrylic paints- Black, Burnt Orange, Burnt Sienna, Cadmium Yellow, and White
Candy corn stencil-I cut my own from a piece of mylar using a craft knife, or you can just sketch them on with a pencil and paint them in. I purchased the mylar at Wal-Mart.
Witch boot stencil-purchased from Laurie Speltz(The Creative Coach).
3 Medium stencil brushes
#4 filbert, and a #10/0 liner brush.
Small checkerboard stencil-purchased mine at Michael's Craft Stores.
Candy of your choice
2 pieces of raffia
Fall bittersweet picks with rusty stars.
Wire cutters
2 pieces of black annulled wire-to make the hanger. Cut one to 24" and one to 18". I purchased mine at Ace Hardware.
2 small pieces of wax paper-to place in-between the pocket so that the paint does not soak thru the other side, and one for your paint palette.
Paper towel-to remove the excess paint of the stencil brush.
Small craft knife
Pencil
Masking tape or black electrical tape-to tape your stencil in place.
Small wooden dowel-to make curly wire(optional).

To learn more about stenciling see TIPS AND TECHNIQUES, on this blog and scroll down to stencilling.
Begin by cutting out your denim pockets. Once they have been cut out, place a small piece of wax paper in-between the pocket so that the paint does not soak thru to the other side, and set aside until needed.  Prepare your stencil by sketching a candy corn onto the mylar and cut out with a small craft knife. Be sure to cut it onto a surface that you will not cut thru. I use an old piece of hardboard to place the mylar on.  If your not feeling creative enough to sketch your own stencil, search the web for free candy corn templates.  There are several available.

  


Candy corn pocket
Begin by taping your stencil down onto the denim pocket, and stencil in the candy corns in a coat of white, then stencil in the  appropriate colors using your stencil brushes.  This will take 2-3 applications to get a good cover.  When dry tap in a bit of Burnt Sienna, just under the Cadmium Yellow.  Apply 2-3 coats of Black around the edge of the pocket using the #4 filbert, and allow to dry.  Once dry stencil in the checkerboard in Burnt Orange. Now cut your piece of wire to 24"  Starting on the back side of the pocket, gently push and twist until the wire pokes thru to the front side.  Leave about 2" sticking out.  Now take one of your paint brushes or a small wooden dowel and begin wrapping the wire around it, again leave about 2" to push thru to the other side.  Now pull the wooden dowel out and stretch out the wire a bit to form a nice hanger. Now twist the 2" piece in the same manner and push flat against the pocket. Allow to dry and cut your Fall pics to your desired size and stick them down into the pocket.  Add the raffia bow to the side and you have a cute Fall decoration.

Witch boot stencil
Follow the same instructions as above for stenciling in the witch boots.  I then lightly sketched in the socks with a pencil and painted them in with the #4 filbert, using the Burnt Orange.  This will take about 2 coats to cover.  Once dry add the black stripes with the #10 liner. Allow to dry and follow the instructions above to add hanger and raffia.  Fill with candy of your choice for a cute treat pocket.
You could also stencil in words such as trick or treat, Halloween, treats, or whatever else you see fit.

http://www.patternmart.com/pattern/3143/Free+Punkins+Pumpkin+E+Pattern+PM
Just ran across this  free pattern on Pinterest and had to share...so cute!

Paparazzi Jewlry

Have you heard about Paparazzi Jewelry......It is some pretty awesome jewelry and very inexpensive.  I purchased 2 bracelets for $11.00 total...can't go wrong at that price.  They have become some of my most favorite bracelets.  I liked them so much I purchased 2 necklaces for the same price and 2 bracelets for my 2 grand daughters that attended, and they were even less.  I think 2/$5.00  To view some of the jewelry or if you have questions, visit  http://www.facebook.com/#!/pages/Paparazzi-by-Jessica/452832284732191  Don't forget to like her page.

How to make your own silicone lights

   Check out the Pickled Pepper Patch....There is a great tutorial on how to make your own silicone lights, along with alot of other tutorials.  They truely have a great blog! A must see! Follow the link below http://charsethman.blogspot.com/2009/11/tutorial-tuesday.html

Styrofoam Easter bunnies

Since Easter is just around the corner, I wanted to share these little guys.

They go back to my childhood days.  My dear aunt has made these as long as I can remember.  She would sell tons of these at the church bazars.  God rest her soul she passed away last year at the age of 92.  She was a big inspiration to me as a child.  I used to spend a week with her in the summer, and it was craft heaven for me.  I could not wait for that week to arrive.